Please check the regulations in your area or return it to where it was purchased so that it can be placed in our recycling system. This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. If your pet appears to be stressed, slow down the training schedule, add additional days of training or increase the amount of play time. Transmitter: Transmits the radio signal and is the center of the pet area. Walk back into the pet area until the receiver stops sounding. If you have more than 1 pet at home, simply purchase as many additional receiver collars as you need so all of your pets can use the same wireless system. The static correction levels increase in strength from 1 to 6. This device complies with part 15 of the FCC Rules. When serviced by Radio Systems Customer Service, RadiSystems covers labour and parts for the first year of ownership; after the first year, a service or upgrade charge will apply relative to replacement of the product with new or refurbished items at Radio Systems sole discretion.The limited warranty is non-transferable and shall automatically terminate if the original retail consumer purchaser resells the Radio Systems product or transfers the property on which the Radio Systems product is installed. The transmitter is located at the exact center of the pet area. Step 5: Place the Boundary FlagsThe boundary flags are visual reminders for your pet of where the boundary zone is located. The interchangeable design of the collar strap lets you customize your pets collar using any 3/4-inch non-metallic strap of your choice. Each charge can last up to 3 weeks depending upon frequency of use. Explanation of Attention Words and Symbols used in this product manual This is the safety alert symbol. Reestablish the pet area and mark it with boundary flags so your pet knows his boundary zone. Unplug the transmitter power adaptor from the power jack located on the bottom of the transmitter. PETSAFE Stay & Play Compact Wireless Fence, PIF00-12917, Skip to the beginning of the images gallery. This may activate the receiver collar. Had to redo the flags. Using it successfully requires that you spend some time training your pet. Have a friend or neighbor walk another pet outside the boundary area. Taking Your Pet Out of the Pet AreaImportant: Remove the receiver collar and leave it at home.Once your pet learns the boundary zone, he will be reluctant to cross it for walks or car rides.Option 1:Replace the receiver collar with a regular collar. Plug the adaptor into a functional 120-volt outlet. Wasn't sure it would work for me. Your neighbors containment signal may interfere with the operation of the receiver collar preventing activation close to their fence. My pet reacts strongly to the static correction and has become fearful. But it works great she stops at the beep. PetSafe brand is here to help you and your pet live happy together. If a rash or sore is found, discontinue use of the receiver collar until the skin has healed. The audible tone is all they need to hear to come to a stop. Once your pet consistently respects the boundary zone regardless of distractions or temptations, he is ready for the next step: unleashed supervision (7D). My next-door neighbor has a containmentsystem and the receiver collar does not activate near their property. The fit should be snug but not constricting (6B). Whether your dog is rolling on his back in the grass or playing a game of fetch, the PetSafe Stay & Play Compact Wireless Fence gives your best friend freedom to safely enjoy his favorite yard activities. Over Correction ProtectionIf your pet enters the boundary zone or continues anywhere beyond the pet area, this feature limits the static correction duration to 15 seconds. One of our pugs and my son's dog will chase cars if not for this control. Comment document.getElementById("comment").setAttribute("id","a2258a6a53dd4d2c5af5a2e80250aea1");document.getElementById("afe6277d1c").setAttribute("id","comment"); Save my name, email, and website in this browser for the next time I comment. Play with your pet for a while during the first few sessions. You may have turned the boundary control dial down too quickly, causing the receiver collar to go into power-fail mode. Check the tightness of the receiver collar by inserting one finger between the end of a contact point and your pets neck. Indicators of a response include: looking around in curiosity, flicking of the ears, or scratching at the collar. Two-Person MethodHold the receiver collar about waist high with logo side facing away from the transmitter and contact points facing upwards. One caution: Do not put your dog in a vehicle while wearing the collar as it will trigger even well within the range of the transmitter. Claims Procedure: Any claim made under this Warranty should be made directly to Radio Systems Australia Pty Ltd.Customer Care Centre at:Radio Systems Australia Pty Ltd.PO Box 3442Australia Fair QLD 4215, AustraliaAustralia Residents: 1800 786 608New Zealand Residents: 0800 543 054Email: [emailprotected]. Some descriptions of advanced pressure ulcers describe the sores as looking like burns on the dogs neck. Do not force it in backward. If this continues to occur, consider relocating the transmitter and resetting the pet area. Frequent charging can have a negative effect on the battery. Make sure the static correction level is set at 2 or above. She made a second pass toward the street, heard the tone and stopped. Contact the Customer Care Center for a replacement. Step 3: Prepare the Receiver CollarYour receiver collar comes with short contact points. To file a claim, proof of purchase must be provided. Do not try todo too much tooquickly. This product is not a toy. Your email address will not be published. Charging too often can reduce battery life. my dog when this is used since I have a small potty area fenced. The power loss alarm in the transmitter is activated to alert you that power has been removed from the transmitter and your pet is no longer being contained. Copyright 1995-2022 eBay Inc. All Rights Reserved. If you are not sure that this product is right for your pet, please talk to your veterinarian or a certified trainer. Record your settings on page 13 for future reference. Find the distance on the transmitter range chart on page 13 and set the boundary switch and boundary control dial. Have a family member cross from inside the boundary and exit it. If the condition persists beyond 48 hours, see your veterinarian. This product worked excellent for keeping them on my property. While your pet is still learning the boundary, contain him by another means, such as with a pen or a leash. Keep your mood upbeat as dogs can understand when you are happy or upset. Not for use with aggressive pets. After the first shock, she returned to the yard and I pet her and told her she was a good girl. For the best experience on our site, be sure to turn on Javascript in your browser. Walk your pet out of the pet area while giving a command such as OK at a specific place along the boundary zone (the end of your driveway, sidewalk, etc.). If necessary, add in more days of training before moving on to the next step. Facing away from the transmitter, hold the receiver collar at the edge of the desired pet area (4C).Starting with the boundary control dial set to 8, have a second person turn the dial down SLOWLY. Start with your pet standing comfortably (6A). Recharging the battery outside of this temperature range can cause the battery to overheat, explode or catch fire. item 1 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917), item 2 Petsafe Stay and Play Wireless Pet Fence System (PIF00-12917), item 3 PetSafe stay & play compact wireless PIF00-12917 W/Collar & Charger #24 0089, item 4 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917) Open Box Read, item 5 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917) Open Box, item 6 Pet Safe Stay & Play Compact Wireless Pet Fence Extra Transmitter, item 7 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917), 4.5 out of 5 stars based on 136 product ratings. Never connect a leash to a collar with contact points. Radio Systems Corporation10427 PetSafe WayKnoxville, TN 37932+1 (800) 732-2677petsafe.comr a list of patents protecting this product, please visitwww.radiosystemscorporation.com/patentsYU40 0 -1243/82019 Radio Systems Corporation, Product Manual PIF-275-19 Wireless Pet Containment System Receiver CollarPlease read this entire product manual before beginning. The receiver collar will activate within 2 to 3 feet of the boundary flags. You will look like the hunchback of Notre Dame while putting the flags in. 7E. Metal Interference AlarmThe metal interference alarm sounds like an intermittent double tone alarm indicating that the transmitter has been set towards the maximum range and placed on or close to a metal surface. This Limited Warranty excludes accidental damage due to dog chews; lightning damage; or neglect, alteration, and misuse.Consumers who purchase products outside of Australia, New Zealand, or from an unauthorized dealer will need to return the Product to the original place of purchase for any warranty issues.Please note that Radio Systems does not provide refunds, replacements, or upgrades for change of mind, or for any other reason outside of these Warranty terms. Do not place anything on the top of the transmitter or cover any ventilation holes. Start with simple temptations and work your way up. Remove the collar after each training session. Never shave your pets neck; this may lead to a rash or infection. Follow the setup procedures (Steps 1 through 4) wherever you wish to have containment of your pet. When using a separate collar for a leash, do not put pressure on the receiver collar. Very quiet beep. Hold the test light contacts to the contact points (4B). United States and CanadaRadio Systems Corporation10427 PetSafe WayKnoxville, TN 37932 USAAustralia/New ZealandIn compliance with the Australian Consumer Law, Warranties Against Defects, effective January 1, 2012, warranty details of this Product are as follows: One Year Non-Transferable Limited WarrantyWhat is covered: Radio Systems Australia Pty Ltd. (hereinafter referred to as Radio Systems) warrants to the original retail purchaser, and not any other purchaser or subsequent owner, that its product, when subject to normal and proper residential use, will be free from defects in material or workmanship for a period of one (1) year from the purchase dateAn original retail consumer purchaser is a person or entity who originally purchases the Product, or a gift recipient of a new product that is unopened and in its original packaging. If you enjoy camping or traveling in your RV with your dog by your side, you can take this portable wireless fence with you wherever you go. Increase the static correction level by pressing and releasing the mode button within 5 seconds of the previous series of flashes. Start these sessions at about 15 minutes and gradually work up to an hour or more.When your pet proves trustworthy, you can let him out on his own. Takes a while to flag it but no different than the buried system and not near the work I know I put one in years ago. Just make sure to continue to check the tightness of the receiver collar and remove it when it is not in use. He still is oopsing and making the collar beep but heads for the house. Radio Systems requests the Consumer to contact the Radio Systems Customer Care Centre to obtain a Warranty Return number, prior to sending the Product. Always remove your pets receiver collar before performing any fence transmitter testing. Relocate the interfered receiving antenna. Your pet wears a receiver collar with contact points that touch his neck, and, once trained, is allowed to roam freely in the pet area. In the event of a power loss, your pet is no longer contained. The metal crate may block the transmitter signal which causes the receiver collar to activate. To make it easier to hear the warning beep, place the receiver collar on your pet with the logo side of receiver facing your pets chin. Walk to the edge of the desired pet area. DO THE TRAINING! It is recommended to remove the receiver collar from your pet when indoors to avoid activation of the receiver collar. Make sure the transmitter is on and set up according to the directions. Ensure the entire house is within the pet area. Using the test light, with the static correction level set at 2 or greater, hold the receiver collar at your pets neck height with logo side facing away from the transmitter. We recommend that the receiver collar be used until the receiver indicator light blinks yellow or red. When possible reposition the collar on your pets neck every 1 to 2 hours. Finish each training session on a positive note with lots of praise and play. Aggressive pets can cause severe injury or death to their owners and others. The receiver collar tone is soundingeverywhere. Remember that this system is not a solid barrier. However, there is no guarantee that interference will not occur in a practical installation. The receiver collar tone is sounding but my pet is not responding to the static correction. This warranty is in addition to other rights and remedies available to you under the law. Radio Systems Corporation shall NOT be liable for any property damage, economic loss or any consequential damages sustained as a result of any animal crossing the boundary. The transmitter is sounding an intermittentdouble tone alarm. Be sure to remove the receiver collar before removing power from the transmitter. Be sure to place the collar on your dogs neck with the PetSafe logo facing up. The lowest-priced brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable).Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag.See details for additional description. Wash the dogs neck area and the contacts of the collar weekly with a damp cloth. CAUTION Proper fit of the receiver collar is important. The store will not work correctly in the case when cookies are disabled. Proper training of your pet is essential to successfully using the system. Not all pets can be trained to avoid crossing the boundary! Note: If your next-door neighbor has a containment system, see the troubleshooting section page 18.To maximize your pet area, make sure the boundary switch is on High and the boundary control dial is set to 8. Tighten the contact points using the contact point wrench (3A). I unplug and take the collar off when in the house since I had read about the electric bill . Something went wrong. Plug the receiver charger into the receiver charge jack on the receiver collar. Check the fit to prevent excessive pressure; follow the instructions in this product manual. Transmission Failure AlarmThe transmission failure alarm makes a continuous tone indicating a transmitter problem. You are both ready to enjoy more freedom. Place the boundary switch on Low if the boundary zone will be less than 45 feet from the transmitter. My dogs took to this faster than most, because they have prior training with a correction collar. It is used to alert you to potential personal injury hazards. Allow your pet to cross the boundary (7B) and hear the tone from the collar, then ask him to come back into the pet area (7C) and praise and reward him. If he escapes, remove the collar and lead him back into the pet area. You should expect hundreds of recharge cycles from your battery; however, do not charge your receiver collar every night. Step 4: Adjust the Pet Area to Desired SizeMake sure the entire pet area lies within your property boundaries (4A). Press the alarm to disable the button for 5 seconds then release. We purchased an additional unit for our son to use with his dog and she learned the limits in less than a day. Hold the receiver collar about waist high until the receiver collar tone sounds and the test light flashes. Radio Systems goods come with guarantees that cannot be excluded under the Australian Consumer Law. This is normal for the electromagnetic field of the Stay & Play. Dog are sensitive. Avoid leaving the collar on the dog for more than 12 hours per day. This condition is commonly known as bed sores. This sometimes occurs if a large metal object is between the receiver collar and transmitter, if the orientation of the receiver collar changes near the boundary zone, or if the surrounding electronic noise interferes with the signal. Failure to do so may delay in the repair orreplacement of the Product. If a transmission failure ever occurs the alarm warns you that your pet is no longer being contained. Open box, but unused. If a rash or sore is found, discontinue use of the collar until the skin has healed. Walk back into the pet area until the beeping stops. Make sure receiver collar is turned on and battery status lights are flashing every 4-5 seconds. Refer to the function and response table to choose the static correction level that best fits your pet. Your goal is for your dog to consistently choose to stay in the pet area. Save them in case you move or need to train another pet. While the system locks out a further static correction, the green light will remain on for 10 seconds.In the unlikely event that your pet leaves the pet area, he will not receive a static correction upon return to the pet area. The receiver collar charger is designed to plug into a standard AC wall outlet. The Product must be returned within 7 days of receiving the replacement. Radio Systems will test and replace the faulty unit or its components and return to the consumer free of charge, provided the Product is within its said warranty period. My dog is enjoying his yard with out me yelling at him to come back from greeting neighbors, their dogs, or just adding my neighbors yards his own idea of his territory.Read full review, Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Electronic Fences. The receiver collar activates when it loses the transmitter signal. Do not place anything on top of the transmitter or cover any ventilation holes. This may overheat the transmitter and cause early transmit failure. This equipment must be recycled. For additional information on bed sores and pressure necrosis, please visit our website. Radio Systems Corporation recommends the use of an Uninterruptible Power Supply (UPS) for use with your wireless fence. The transmitter may need to be moved to adjust the pet area to include the entire house. If relocating the transmitter, remove the receiver collar from your pet before turning the transmitter off. The system works by transmitting a radio signal up to 105 feet in all directions. The intermittent double tone is the metal interference alarm. It is designed to act as a deterrent to remind pets to remain within the established boundary by use of static correction. Held it in my hand for 2 and 3. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed. Charge the Receiver CollarLift and slide the receiver collar strap away from the front of the unit (2A). Record your settings on page 13 for future reference. Neither dog has gotten a second shock. In this situation, your pet can no longer be contained. This sealing makes it virtually impossible, without misuse or abuse, for your receiver collar battery to leak onto your pets neck. 2022 Bomgaars Supply Inc., All rights reserved. and up and adjusts to fit neck sizes 6-28 in, Simple Set-Up - Set up your new wireless fence in just 1-2 hours to give your dog a secure play area, Portable - Take this compact, portable fence with you when you and your dog go camping or travel in your RV (outlet required), Contain All Your Pets - - With the purchase of additional collars, this wireless fence allows you to safely contain an unlimited number of pets with one fence system. Using a 400 VA UPS a consumer should expect 3 hours of backup time. Days 24On days 2 through 4, repeat this process, but with the collar set to level 2the mildest static correction level. Repeat this process around the boundary zone until it is marked with boundary flags every 10 feet. With your pet on a leash and with his favorite treats on hand, allow him to explore the pet area (7A). Your goal is for your dog to associate being inside the pet area with rewarding experiences. Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts. He still is oopsing and making the collar beep but heads for the house. One-Person MethodMeasure the shortest distance from the desired boundary zone to the transmitter. The receiver collar tone is sounding inside the house. The correction will start in the boundary zone and continue anywhere beyond the pet area.Note: The receiver collar is equipped with a safety time-out feature that will stop correcting after 15 seconds if your pet remains outside the pet area.Receiver Collar: Receives the radio signal from the transmitter.Receiver Indicator Light: Indicates the level of correction at which the receiver collar is set. Failing to follow the important safety information at the front of the product manual has caused pressure ulcers. The energy in an output pulse is only a few thousandths of a Joule; it is similar in nature to the static pulse that you may feel when getting out of your car. WarrantyOne Year Non-Transferable Limited WarrantyThis Product has the benefit of a limited manufacturers warranty. If you have any questions, please dont hesitate to contact us.Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd., and any other affiliate or Brand of Radio Systems Corporation may be referred to collectively as We or Us. To prevent an unintended correction, after the boundary flags have been placed, be sure to set the static correction on the receiver collar back to level 1, which is tone only. Be assured that electronic collars do not use enough energy to create electrical burns. Pushing the correction level button while the receiver collar is on level 6 will cause the receiver collar to revert to level 1. This equipment has been tested and found to come with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. With this wireless fence, you decide how far to extend the boundary to keep your pet secure in their designated space. Without proof of purchase, Radio Systems will not repair or replace faulty components. If he does not respond, check the fit of the collar to make sure the contact points are making contact with his skin. They were both familiar with shock collar training from a trainer when they were puppies and they took to this without much training on my part. Our aim is to help you have the best companionship and the most memorable moments together. I unplug and take the collar off when in the house since I had read about the electric bill . Check that the transmitter is plugged into a working standard 120-volt outlet, the power light is on, and the transmitter controls are set at your desired settings. Bring the receiver collar within 10 feet of the transmitter to reset. Make sure no continuous alarm is sounding on the transmitter. They were not coming back when called and I was afraid that they were going to get hit by a car. You must relocate the transmitter away from metal or the alarm will continue to sound and the transmission from the transmitter will remain disabled. Treat, praise, play. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. The transmitter is powered by a standard 120-volt outlet.Boundary Switch: Adjust according to the size of the pet area desired.Note: Adjusting the switch does not change the level of static correction on the receiver collar.Boundary Control Dial: Adjusts the distance from the transmitter to the boundary zone.Note: Adjusting the dial does not change the level of static correction on the receiver collar.Alarm Disable Button: Silences power loss alarm and re-initiates the transmitter radio signal after metal interference alarm activates.Power Loss Alarm: Sounds an intermittent single tone alarm which indicates power has been removed from the transmitter.Metal Interference Alarm: Disables the transmitter radio signal to protect the transmitter from damage if placed too close to metal objects.Transmission Failure Alarm: Continuous tone which indicates a transmitter problem. The receiver collar has injured my pets neck. Verify the pet area boundary by walking towards the boundary zone and verifying that thetone/test light flashes begin at the desired location. The transmitter needs to be located indoors.Pet Area: Distance from the transmitter where your pet can roam freely.Boundary Zone: 2- to 3-foot-wide area outside the pet area where your pets receiver will begin to tone and then begin to deliver a static correction. Turn the Receiver Collar OFFPress and hold the mode button continuously for 5 seconds. Press the alarm disable button for 5 seconds then release. The receiver collar activates when it loses the transmitter signal. This system is NOT a solid barrier. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. If the Product is deemed to be faulty within 30 days from date of original purchase, Radio Systems will organize for a replacement to be sent in advance of returning the faulty Product. Power outages can be unpredictable, and the use of a UPS will provide you with some time to properly restrain your pet. Increase the separation between the equipment and receiver. Therefore, if you have reason to believe that your pet may pose a danger to others or harm himself if he is not kept from crossing the boundary, you should NOT rely solely upon this system to confine your pet.
Mityvac Vacuum Pump Repair Kit, Rotary 10,000 Lb Lift Installation, Fastest Wireless Charger For Samsung, Vans Trippy Floral Marshmallow, Midi Dress With Puffy Sleeves, Waterproof Kitchen Sink Cabinet, Jose Cuervo Pink Lemonade Alcohol Content, Cheesecloth Table Overlay, Zara Ader Error Sweatshirt, 2022 Toyota Corolla Interior, Used Leather Sofas For Sale Near Me, Cattelan Italia Airport,
